Hello,
I just got my project running after years of life getting in the way. It is a 2002 LQ9 with the Po1 pcm/T56 from 02 camaro in a 72 c20 long bed that identifies as a c10 short bed.
The only real changes were:
EPS cam 222/226 @ 113 lsa, .597/.598 lift
tri Y headers
LS2 injectors
The first problem-
I am running this SD only no MAF so I ended up getting an IAT sensor from a 2000ish Buick Regal GS and stuck it in the intake.
The IAT is reading -38 all the time, so I am curious if anyone has a sensor curve available for that on hand.
I found a tune file in the repository but no luck.
Shouldnt that have the same curve as the factory lq9?
I suppose it could be the wiring, I would have to go look and see which wires I used from the MAF harness.