I have a potential customers who has a bad and damaged tune on there car making it run very poorly, i am just looking for stock files to use as compare please so i can get his car back up and running properly
I have a potential customers who has a bad and damaged tune on there car making it run very poorly, i am just looking for stock files to use as compare please so i can get his car back up and running properly
Here is a stock 2012 STI file. HP Tuners doesn't have much for support for the subaru. I have had a few issues with not much help.
stock joshs sti base.hpt
2012 Subaru WRX STI
2013 Camaro SS
2001 Corvette Z06
GPI VVT Cam, E85 and Fuel System Upgrades, Nitrous Outlet Plate System, Bolt On's, 3.91 w/L99
www.tappantuning.com/ REMOTE TUNING LINK
I appreciate the info, What issues are you having?
2014 stock wrx
Originally Posted by DB5249
When I read my file my sdrive tables are scrambled. I even tried a different ECU. Also starts and dies when I try to install the no lift and launch control patch.
2012 Subaru WRX STI
2013 Camaro SS
2001 Corvette Z06
GPI VVT Cam, E85 and Fuel System Upgrades, Nitrous Outlet Plate System, Bolt On's, 3.91 w/L99
www.tappantuning.com/ REMOTE TUNING LINK
i will send you the scan file off the car, everything is stock except tq limits.2013 STI With Adjusted Tq Limits.hpt
also to remove the patch you have to write entire in vcm editor. if you only write calibration it will not remove the patch. Also, keep in mind you need to keep your laptop charged and vehicle battery on charger to help prevent a failed flash, a failed flash on a write entire flash can brick a computer
Reply With Quote