Results 1 to 3 of 3

Thread: 2016 ZO6 AFR rich mid pull

  1. #1
    Potential Tuner
    Join Date
    Feb 2020
    Posts
    3

    2016 ZO6 AFR rich mid pull

    Hello, Working on a 2016 ZO6 with headers and intake. Midway through a pull my wideband drops to 10.3. I was working on a 2018 Cts v an hour before and it wasn't doing this. I also have seen this on a 2018 Camaro but never found a solution and haven't seen the car since.

    Here is the tune and log

    2016ZO6+24TIMINGWTRANSMAFONDFCOOFFOETRANS.hpt

    2016ZO6.hpl

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    your not logging needed fuel pressure

    but your out of injector also

    you need to see what your LOW side and high side are doing
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  3. #3
    Tuning Addict
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    6,802
    What he said, but most likely cat over temp - don't know if can't see the tune...
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    ~Greg Huggins~
    Remote Tuning Available at gh[email protected]
    Mobile Tuning Available for North Georgia and WNC