Hey guys, I am using an AEM 30-0310 x series analog 0-5v output wired into pro features. I tested with a voltmeter that I am getting voltage out of the wideband side of the wiring but in the scanner, I am not showing anything for voltage. I have tried aem white to PF red and blue and aem brown to PF black. Am I missing something here? I know the CAN output cannot be used but I would think it should still show voltage on the analog side. Starting to beat my head in a little bit.
2015 Sierra 4wd CC L83/6l80 combo: High Flow Filter, Catback
2020 Mustang GT 5.0/10r80 combo: Headers only, 93 self tuned 7.52 1/8
AEM Brown to ProLink Black. Then ,check the voltage between AEM white and AEM Brown, with a meter.
Checked that and voltage was around 1.3v. but the voltage won't show in the scanner either.Originally Posted by dr.mike
1.3v is really rich. like 10.5 or so ...
Reply With Quote