Page 2 of 2 FirstFirst 12
Results 21 to 34 of 34

Thread: 2016 mustang gt new too tuning

  1. #21
    Tuner in Training
    Join Date
    Feb 2022
    Posts
    22
    I cant get it still wont read the e85

  2. #22
    Tuner in Training
    Join Date
    Feb 2022
    Posts
    22
    if someone could fix this tune I would pay for your time

  3. #23
    Tuner in Training
    Join Date
    Feb 2022
    Posts
    22
    I got it to run using settings from 2017 f150
    Attached Files Attached Files

  4. #24
    Advanced Tuner
    Join Date
    Feb 2012
    Location
    TEXAS
    Posts
    631
    https://www.dropbox.com/sh/97e689wv0...nwWK71KVa?dl=0

    I will leave this up for 24hrs. this is some of the parameters your were missing on your flex file.

  5. #25
    Tuner in Training
    Join Date
    Feb 2022
    Posts
    22
    how do I open it with hp turners or view it nothing I got on my computer will open it

  6. #26
    Advanced Tuner
    Join Date
    Feb 2012
    Location
    TEXAS
    Posts
    631
    in editor click on Edit> TEMPLATE APPLICATOR> Open File>Apply Changes > a box OPENS with a Green Arrow it>click it and it will apply the file

  7. #27
    Tuner in Training
    Join Date
    Feb 2022
    Posts
    22
    Thanks I will check it out

  8. #28
    i used frpp3 as the base file for my 2016 gt with 350 tb,manifold headers with e85 .

  9. #29
    Tuner in Training
    Join Date
    Feb 2022
    Posts
    22
    where do I get that at

  10. #30
    Tuner in Training
    Join Date
    Feb 2022
    Posts
    22
    Quote Originally Posted by GSLSE20B View Post
    i used frpp3 as the base file for my 2016 gt with 350 tb,manifold headers with e85 .
    where do I get that at

  11. #31
    Tuner in Training
    Join Date
    Feb 2022
    Posts
    22
    this is my log with the gt350tb installed still got some tq based decal coming on wot
    Attached Files Attached Files

  12. #32
    Advanced Tuner
    Join Date
    Dec 2017
    Posts
    767
    Should be a copy in tune repository

  13. #33
    Tuner in Training
    Join Date
    Feb 2022
    Posts
    22
    what do you think about this wot logs is torque control supposed to take over spark source
    Attached Files Attached Files

  14. #34
    Advanced Tuner
    Join Date
    Feb 2012
    Location
    TEXAS
    Posts
    631
    Quote Originally Posted by Smokinrob View Post
    what do you think about this wot logs is torque control supposed to take over spark source
    Change the under flex fuel tab> GENERAL > NVM AFR RECOVERY > to Use Initial Value (this should help read for E-85)
    Also MAF Peroid Still needs work, from looking at the 4th gear 5,000 rpm log file. Fix the Fuel trims
    IPC Torque Monitors >raise wheel torque error say 75,000.00 ( helps with torque monitoring )
    Max Torque Raise to 650