Results 1 to 2 of 2

Thread: map and tmap sensor changes

  1. 02-28-2022 #1
    CCND77
    CCND77 is offline
    Potential Tuner
    Join Date
    Sep 2021
    Posts
    2

    map and tmap sensor changes

    this is for a ford fiesta EU st 180 ECOBOOST.
    I WANT TO CHANGE MY ORIGINAL MAP AND TMAP 2 BAR SENSORS
    PART 1 BOSCH 4 BAR TMAP SENSORS AND 1 AEM 3.5 BAR MAP SENSORS
    Reply With Quote Reply With Quote
  2. 04-16-2022 #2
    eatonm62
    eatonm62 is offline
    Potential Tuner
    Join Date
    Apr 2021
    Posts
    6
    Yes, it is possible. You will need to make sure the option is available in the tune file. If it isn't then send an email to support and request it. As I have been down this road already it is important that the map sensor is able to read vacuum MAP sensors from Diesel engines are usually not a good replacement. I am intending on using these Bosch 0281002456 although it only reads to 3.5bar.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »