Page 2 of 4 FirstFirst 1234 LastLast
Results 21 to 40 of 63

Thread: Polaris Powersports Support Now Available!

  1. 03-04-2022 #21
    dlc_racing
    dlc_racing is offline
    Advanced Tuner
    Join Date
    Nov 2008
    Location
    Tampico Bay, Mexico
    Posts
    222
    Quote Originally Posted by Eric@HPTuners View Post
    What specifically about the scanner?

    It's on par with the other vehicles we support. We can log the broadcast data, direct memory, as well as SAE, and PIDs. I have defined everything I think anyone would need to calibrate properly.
    thanks a lot eric that was what i want to hear
    all the way from Tampico bay Mexico
    Reply With Quote Reply With Quote
  2. 03-04-2022 #22
    minytrker
    minytrker is offline
    Tuner
    Join Date
    Aug 2005
    Location
    Texas
    Posts
    115
    Quote Originally Posted by Eric@HPTuners View Post
    You will need to return to the stock calibration, as the DJ calibrations cannot be read.

    The files posted above represent what you will see on your vehicle. All of these Polaris ME17s are nearly identical as far as parameters go.

    Not sure on the gains, as I have not personally tuned one. I just make the tools to make tuning them properly attainable.

    Thats great, I love the layout of hpt for it. I will have to find my dynojet interface, havent used it in 2 years.
    Reply With Quote Reply With Quote
  3. 03-04-2022 #23
    GaS Engines
    GaS Engines is offline
    Tuner in Training GaS Engines's Avatar
    Join Date
    Jan 2021
    Posts
    48
    Trying to pull the file on a 2017 Sportsman 850HO SP and I keep getting a checksum error. All Drivers updated and using beta.
    2013 Charger R/T - 1-3/4'' Longtubes, Catless Mids, 180 T-Stat, CAI, 6.4 Manifold Swap, 370whp@5600/411wtq@3950
    Contact [email protected] for Engine Building or Tuning needs!
    Reply With Quote Reply With Quote
  4. 03-07-2022 #24
    Eric@HPTuners
    Eric@HPTuners is offline
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,508
    Quote Originally Posted by GaS Engines View Post
    Trying to pull the file on a 2017 Sportsman 850HO SP and I keep getting a checksum error. All Drivers updated and using beta.
    Email the file to our support team and it will be fixed up.
    Eric Brooks
    HP Tuners, LLC
    Reply With Quote Reply With Quote
  5. 03-07-2022 #25
    GaS Engines
    GaS Engines is offline
    Tuner in Training GaS Engines's Avatar
    Join Date
    Jan 2021
    Posts
    48
    File was sent along with VCM info. Also gave them a comparative file from a 2016 Polaris Sportsman 570 EFI/EPS/EBS. It was a successful pull, it just thinks its a 1986
    2013 Charger R/T - 1-3/4'' Longtubes, Catless Mids, 180 T-Stat, CAI, 6.4 Manifold Swap, 370whp@5600/411wtq@3950
    Contact [email protected] for Engine Building or Tuning needs!
    Reply With Quote Reply With Quote
  6. 03-08-2022 #26
    Eric@HPTuners
    Eric@HPTuners is offline
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,508
    Quote Originally Posted by GaS Engines View Post
    File was sent along with VCM info. Also gave them a comparative file from a 2016 Polaris Sportsman 570 EFI/EPS/EBS. It was a successful pull, it just thinks its a 1986
    I think yours was the one I added earlier today. And yes, the VIN decoder for Polaris leaves a lot to be desired. Its slowly being fixed up as we see more files.
    Eric Brooks
    HP Tuners, LLC
    Reply With Quote Reply With Quote
  7. 03-08-2022 #27
    dsandahl
    dsandahl is offline
    Tuner in Training
    Join Date
    Mar 2019
    Posts
    11
    I'm sending some files in soon with more checksum errors.
    Reply With Quote Reply With Quote
  8. 03-09-2022 #28
    GaS Engines
    GaS Engines is offline
    Tuner in Training GaS Engines's Avatar
    Join Date
    Jan 2021
    Posts
    48
    Downloaded/updated to the newest Beta. Pulled the file successfully from a 2017 Sportsman 850 SP! Thank you guys! That was a very fast turn around!
    2013 Charger R/T - 1-3/4'' Longtubes, Catless Mids, 180 T-Stat, CAI, 6.4 Manifold Swap, 370whp@5600/411wtq@3950
    Contact [email protected] for Engine Building or Tuning needs!
    Reply With Quote Reply With Quote
  9. 03-10-2022 #29
    Kev90sc1`
    Kev90sc1` is offline
    Potential Tuner
    Join Date
    Nov 2020
    Posts
    3
    I'm having issues with my 2011 900XP, it takes about 15 min to read? After it completes the program freezes, and I can't do anything....
    Reply With Quote Reply With Quote
  10. 03-10-2022 #30
    FASS714
    FASS714 is offline
    Potential Tuner
    Join Date
    Mar 2022
    Posts
    6
    I?m having an issue with reading the ecu, when hooked up and click read it just sits there. The gauges go back and fourth and status bar doesn?t load?and idea what it could be software is 4.10 and I have the cable adapter from hptuners running a MPVI2
    Reply With Quote Reply With Quote
  11. 03-10-2022 #31
    Eric@HPTuners
    Eric@HPTuners is offline
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,508
    Quote Originally Posted by FASS714 View Post
    I?m having an issue with reading the ecu, when hooked up and click read it just sits there. The gauges go back and fourth and status bar doesn?t load?and idea what it could be software is 4.10 and I have the cable adapter from hptuners running a MPVI2
    The version 4.10 is the problem. You need the latest 4.11 beta to read Polaris.
    Eric Brooks
    HP Tuners, LLC
    Reply With Quote Reply With Quote
  12. 03-10-2022 #32
    Eric@HPTuners
    Eric@HPTuners is offline
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,508
    Quote Originally Posted by Kev90sc1` View Post
    I'm having issues with my 2011 900XP, it takes about 15 min to read? After it completes the program freezes, and I can't do anything....
    Sometimes the save as windows pops up behind the main VCM Editor window. Alt+Tab until you see the save as form.
    Eric Brooks
    HP Tuners, LLC
    Reply With Quote Reply With Quote
  13. 03-10-2022 #33
    Kev90sc1`
    Kev90sc1` is offline
    Potential Tuner
    Join Date
    Nov 2020
    Posts
    3
    Quote Originally Posted by Eric@HPTuners View Post
    Sometimes the save as windows pops up behind the main VCM Editor window. Alt+Tab until you see the save as form.
    I get a "validate Checksum failed" when I get the option to save the file, I've tried it 3 times so far, same result
    Reply With Quote Reply With Quote
  14. 03-10-2022 #34
    dsandahl
    dsandahl is offline
    Tuner in Training
    Join Date
    Mar 2019
    Posts
    11
    Kev90sc1 , are you using the latest beta? If so, your model machine might not be defined yet. Send the file into support and they will work on getting it defined. I had this issue earlier in the week, they defined my machine and updated the Beta software and now it reads my machine fine.
    Reply With Quote Reply With Quote
  15. 03-10-2022 #35
    Kev90sc1`
    Kev90sc1` is offline
    Potential Tuner
    Join Date
    Nov 2020
    Posts
    3
    Quote Originally Posted by dsandahl View Post
    Kev90sc1 , are you using the latest beta? If so, your model machine might not be defined yet. Send the file into support and they will work on getting it defined. I had this issue earlier in the week, they defined my machine and updated the Beta software and now it reads my machine fine.
    I am using the latest beta, I will send the files in, thank you!
    Reply With Quote Reply With Quote
  16. 03-10-2022 #36
    FASS714
    FASS714 is offline
    Potential Tuner
    Join Date
    Mar 2022
    Posts
    6
    Eric thanks for the heads up. got it to read but not its says checksum failed.....
    Last edited by FASS714; 03-10-2022 at 07:50 PM.
    Reply With Quote Reply With Quote
  17. 03-10-2022 #37
    TY194
    TY194 is offline
    Potential Tuner
    Join Date
    Aug 2021
    Posts
    2
    Im having trouble with reading the file from my 21 pro xp. It says failed to connect when i try to read but it will connect with vcm scanner. (using most current beta version)
    Reply With Quote Reply With Quote
  18. 03-11-2022 #38
    Wakethis2006
    Wakethis2006 is offline
    Tuner in Training
    Join Date
    Sep 2014
    Posts
    32
    can i use a mvp1 for these or do you have to upgrade to the 2 or 2+?
    Reply With Quote Reply With Quote
  19. 03-11-2022 #39
    Eric@HPTuners
    Eric@HPTuners is offline
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,508
    MPVI2 or 2+ is required.
    Eric Brooks
    HP Tuners, LLC
    Reply With Quote Reply With Quote
  20. 03-11-2022 #40
    Eric@HPTuners
    Eric@HPTuners is offline
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,508
    Quote Originally Posted by TY194 View Post
    Im having trouble with reading the file from my 21 pro xp. It says failed to connect when i try to read but it will connect with vcm scanner. (using most current beta version)
    Is it stock, or has it been tuned?
    Eric Brooks
    HP Tuners, LLC
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »