This is my first set of ID 1300 x2 I am tuning. The original 1300s injector data is way more straight forward. I have tuned in my fic 1200s really good. Here is what I have done for the 1300 X2s. I am most worried about the offset table as I had to change the axis. I cannot not get the axis to change to 400 it stays at 401. Also for the fics in my hellcat I did not change the axis of the offset table. Does everyone think this looks as you'd expect?
Taking the 400 column and then the y axis I converted to find inj pw vs fuel mass and fuel mass vs inj pw 1640277027832.png
Converted 2.png
Here is the offset table 1640277177629.png
Converted 4.png
Cranking PW multiplier Table 34000 startup base
ID Startup pw scalar is table 44436 statup inj pw scalar
Min Injector Pulsewidth .125
Cranking Pulse cp.png
It will update the multiplier after you enter the data. cp2.png