VVT Cam Table Values, please refresh my memory...

[yrkz06]

I don't do much with these, and had a bookmark somewhere that explained what say a value of 1 versus a value of 20 meant to the actual cam timing. I'll be darned if I can find that bookmark anywhere, and I searched to no avail.

Can someone please refresh my memory on what value equals what cam position?

Thanks everyone

[kevin87turbot]

It's simply the value of cam retard from the full advance position.

[yrkz06]

It's simply the value of cam retard from the full advance position.

Thank you sir, that almost seems too easy LOL

[IARLLC]

Kevin put it pretty clearly. I think that most GEN4 cams are parked at 8.5 advanced (maybe some are 7 or 8...not sure). So a value of 1 would mean 7.5 advanced....and a value of 20 would mean 11.5 retarded past straight up.

DOHC is different though.

[yrkz06]

Kevin put it pretty clearly. I think that most GEN4 cams are parked at 8.5 advanced (maybe some are 7 or 8...not sure). So a value of 1 would mean 7.5 advanced....and a value of 20 would mean 11.5 retarded past straight up.

DOHC is different though.

Thank you as well sir, I knew it wasn't too difficult but couldn't remember where it started at. Made some changes to test and am pleased with the results