I am working on a swap car with a 2018 L83 and a T56 Magnum trans. There is no speed sensor signal to the ecu, so the driver demand table has nothing to reference, which is causing weird throttle issues. Mainly, the throttle hangs pretty bad between shifts, and you get a cruise control effect when you let off the throttle.
I looked around for another OS that I could use that uses RPM on that axis of the DD tables, but all I could find were older E92 Z06's. I tried writing one of those files to the E92A ecu that I am using, but it didn't work.
Does anyone have a 2017+ file with RPM based DD tables?
Thanks