I have been changing my tune files with no problems. I am working a a SD tune but I don't get any error codes. Any thoughts?I don't know if I attached my tune file correctly. Thanks. 10-8 cleaned up wiring and fuel adj A 383 spark table 750 idle.hpt
I have been changing my tune files with no problems. I am working a a SD tune but I don't get any error codes. Any thoughts?I don't know if I attached my tune file correctly. Thanks. 10-8 cleaned up wiring and fuel adj A 383 spark table 750 idle.hpt
Do all three MAF codes to MIL on first error, you should see code P0103 come up if it's in speed density.
I don't know what yours mods are but if that cylinder volume is right, you should stop now and get way way bigger injectors. Stock 25lb/hr ain't gonna cut it.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
the engine is a 406 gen 1 SBC with the 24X conversion, GM hot cam, roller lifters and rockers(1.6)ratio, aluminum heads(64cc),headers,victor EFI intake, 92 MM throttle body, 9.75 to 1 CR