Hi all,
Holden LS1 ute 2001
Im currently running an AEM 30-4110, i have the white wire hooked to the red 5v wire. channel list for gauge 0.543 to 10.3?
Currently Logging but the issue is the wideband signal that is received into the vcm scanner is different to the gauge.
My issue is i'm stuck on the sensor parameters of the gauge i have made sure it is reading in AFR and not lambda its easy 20% out in the tables. could it be as easy as the parameter correction for the gauge causing this/incorrect reading discrepancy on has it something to do with the selection on the afr gauge with maybe the 4 position thing?
I am just unsure as i have red alot on the forums by searching and have solved all my other issues bar this 1 the uego sensor is mounted correctly with not air leaks on the bunge mount as well.
I hope this is enough information for help as i have the data log from the car on the computer at home and not avaliable at the minute
Cheers