I was just wondering how well the DSGs are supported by HPT by now. Is everything there that's needed?
I'm working on tuning a 2013 TDI and have run into torque limiters that I believe are in the transmission. I wasn't sure if I wanted to just spend the money and try the trans tuning with HPT or just plug onto the trans and read/write the .bin.
I've also attached the file. There is something limiting torque to around 380-390nm. I'd appreciate if someone could look at this file and tell me if it could be the trans that's limiting it.
2013 TDI DSG Read.hpt