No Log Data Transmitted

[Trucker82]

I have a 1999 Ford Mustang GT that will not transmit any information to the scanner. Funny, I can flash a tune file no problem. However the only thing the log will show is TPS counts and IAT. I have no usable information to tune this vehicle with. Can you offer direction.

Thank youTune 1.hplStock OEM.hpt

[mstang_man]

I have a 1999 Ford Mustang GT that will not transmit any information to the scanner. Funny, I can flash a tune file no problem. However the only thing the log will show is TPS counts and IAT. I have no usable information to tune this vehicle with. Can you offer direction.

Thank youTune 1.hplStock OEM.hpt

Which Device are you Using?

[Trucker82]

which device are you using?

mpvi2

[Trucker82]

I'm using a MPVI2, I have 2 of them and tried both. I did notice GM uses different pins, and this car was tuned by Steeda at one time. You think they could have done something to disable this feature?

[radcartuning]

I'm using a MPVI2, I have 2 of them and tried both. I did notice GM uses different pins, and this car was tuned by Steeda at one time. You think they could have done something to disable this feature?

Can't use MPVI2. Search for EEC V and VCM scanner thread. It's been a known issue for a couple of years now unfortunately.

[Trucker82]

Can't use MPVI2. Search for EEC V and VCM scanner thread. It's been a known issue for a couple of years now unfortunately.

Okay So... I need to get an older MPVI 1?

[Trucker82]

Okay So... I need to get an older MPVI 1?

thank you Radcartuning!

[radcartuning]

Okay So... I need to get an older MPVI 1?

Yes, if you can find one, or another solution for datalogging. As you mentioned reading and writing works great, it's just the datalogging that won't work

[JuiceNA]

Forscan can log