Results 1 to 1 of 1

Thread: Idle RPM modifiers and throttle blip

  1. #1
    Tuner in Training
    Join Date
    Jun 2020
    Location
    rochester,wa
    Posts
    10

    Idle RPM modifiers and throttle blip

    Im trying to bring the idle down, the car runs really well so far, starts great, my idle is a little high still

    It idles around 850 but I am able to command a 775 in the scanner and it comes right down, I just cant figure out where its modified from the base rpm table

    The other thing is the VE table is getting good, but Im getting a quick lean on hard throttle down, not much but I would like to add a little fuel like an accel pump
    Attached Files Attached Files
    '65 Impala wagon-
    6.1L lq9 10.47:1, summit 8706 cam, 113lsa 226/230 @ .050
    4l80e transmission, 3400 stall
    p01 gen 3 computer, dbc, 3bar os, 90mm tb, tbss intake, 1000cc FIC's
    8.88 @ 85 1/8th mile (21 degrees), 4200lbs

    -Neurodiverse