Hi
I'm having problems writing JTEC ECUs with my MPV2. When I try to write it shows ?Baud Rate: Timed Out?. I?ve tested 3 different jeeps and the problem was the same. I?m only having this problem with these type of ecu.
Hi
I'm having problems writing JTEC ECUs with my MPV2. When I try to write it shows ?Baud Rate: Timed Out?. I?ve tested 3 different jeeps and the problem was the same. I?m only having this problem with these type of ecu.
I'm sorry you're having troubles and we'd love to help you. Have you already opened up a support ticket? If so, do you have your ticket number so that we can review the status? If not, please open a support ticket here: https://support.hptuners.com
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Thanks.
Support ticket opened. Today I tested with another jtec and the error was "Controller Init: Failed". VCM Scanners works wasn't able to tune the vehicle
I have exactly the same problem with my Dodge Ram srt10 ecu jtec baud rate: timed out! failed! I tried on 4 different Srt10. same error message! as if since you made the jtec update for the mpvi3 the mpvi2 no longer works!
