Page 2 of 2 FirstFirst 12
Results 21 to 23 of 23

Thread: first start on my gen3 5.3 ls swap into a volvo 740

  1. 05-04-2022 #21
    IWantATurbo
    IWantATurbo is offline
    Tuner in Training
    Join Date
    Jul 2017
    Posts
    35
    im very lost as what do do with this???
    Reply With Quote Reply With Quote
  2. 05-04-2022 #22
    blindsquirrel
    blindsquirrel is offline
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,649
    What to do with what? Injector data? As long as you leave the vacuum line off going to the regulator, the data is set up correct, with a sloping flow rate & offset tables. But as soon as you get around to running the vacuum hose everything has to change.

    You seem kinda all over the place, scattered, jumping from one thing to the next and skipping things. My advice would be to put the tools down, make a plan, and then follow it step by step.
    Reply With Quote Reply With Quote
  3. 05-04-2022 #23
    IWantATurbo
    IWantATurbo is offline
    Tuner in Training
    Join Date
    Jul 2017
    Posts
    35
    Quote Originally Posted by blindsquirrel View Post
    What to do with what? Injector data? As long as you leave the vacuum line off going to the regulator, the data is set up correct, with a sloping flow rate & offset tables. But as soon as you get around to running the vacuum hose everything has to change.

    You seem kinda all over the place, scattered, jumping from one thing to the next and skipping things. My advice would be to put the tools down, make a plan, and then follow it step by step.
    i 100% agree with you and now that it runs i can. thanks again.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »