Results 1 to 4 of 4

Thread: Failed to flash. Now can't start truck.

  1. #1
    Potential Tuner
    Join Date
    May 2022
    Posts
    2

    Failed to flash. Now can't start truck.

    Just tried to flash the latest tune sent to me by my tuner and got a 'Failed to Start error. I then disconnected and reconnected the battery and tried to start the truck and now it doesn't even attempt to start. Pulled the negative for a few minutes and tried again. Same issue.

    Any ideas?

    This is on a 2008 Toyota Tundra.

  2. #2
    Tuner in Training
    Join Date
    Jul 2018
    Location
    Manteo NC
    Posts
    20
    Any luck with this? I have similiar issue, no start. After reading and modding the file, went to write and controller init failed...Tundra fail write.jpg

  3. #3
    Potential Tuner
    Join Date
    Dec 2023
    Posts
    1
    Did you try flashing the stock backup

  4. #4
    Tuner in Training
    Join Date
    Sep 2018
    Posts
    34
    most probably bricked. you will need a Toyota flasher and try installing a base tune on the bench.