Results 1 to 4 of 4

Thread: User defined parameters

  1. #1
    Tuner in Training
    Join Date
    Mar 2022
    Posts
    24

    User defined parameters

    What are user defined parameters

  2. #2
    Tuner in Training
    Join Date
    Oct 2021
    Posts
    46
    Lets say you know a PID that is unknown to HP tuners. This would allow you to add it too your configuration.

    To me this should be included with the pro feature set. If I have a non standard (to HP tuners) CAN device I should be able to add it myself but I can't without buying that additional feature.

  3. #3
    Senior Tuner
    Join Date
    Jul 2020
    Location
    VIC Australia
    Posts
    1,107
    There is a sticky at the top of this forum section that explains it well. It's not for everyone though, can understand it scaring a few off. If you've played around with a few binaries over your days it will be kinda familiar what you need to do.

    Did you have anything in mind you'd like to set up?

  4. #4
    Tuner in Training
    Join Date
    Mar 2022
    Posts
    24
    Ill pm you