Stock file for Dodge Ram STR10 1500 my 2006

[pnjuhl]

Hello Friends

We are working on the abowe car that is running very poor.

Do not know car history but seems it has had trouble for long time shifting ownership many things tryed.

Finally engine has been pulled out and refurbished, but still not running.

Would like to make sure the PCM / ECU is fully stock to make sure there is no problem with the software.

Can anyone help with stock file for this ECU, picture of the label is attached ?

Next problem was when try to read the ECU the MPVI have finde diagnosis and can identify the car but will not read say "Unsupported interface" please see attached pic.
Anyhow know what that can be ?

Also a pinout for this ECU would be appriciated.

Thanks in advance

Pierre

[pnjuhl]

Hi

Saw this tread
https://forum.hptuners.com/showthrea...(Venom)-tuning

Sent email for support for the beta user program but did not hear anything yet is this still in work / progress ?

Thanks in advance

[white1]

Got one for a 2005 that might get you close

2005 Ram SRT10 stock.hpt

[pnjuhl]

Big thanks White 1!

Was the MPVI +VCM Editor working for read / write on this one for you ?

Best Regards

Pierre

[white1]

I dont do much viper stuff. In fact, this was my first. Its a friends truck and he actually had paid for a remote tune not knowing I would be willing to tune it.

We were able to write the tune fine, logged the channels the tuner wanted and loaded revisions fine as well.

From my experience with SRT4 and Hemis from 2004-2006 some of the channel support is less than great. There might be channels you want to monitor that are not supported (such as knock retard on a 2005 srt4) But as far as logging otherwise or loading tunes I had no issues. I cannot remember if I used my MPVI1 or 2