Results 1 to 3 of 3

Thread: TCC Applied 8 MPH

  1. 07-27-2019 #1
    123pugsy
    123pugsy is offline
    Tuner
    Join Date
    Jun 2011
    Location
    MARKHAM,ON
    Posts
    77

    TCC Applied 8 MPH

    WT?
    I just noticed the TCC shows applied in 1st as soon as I take off.
    Does the scanner just say applied even if it it's not?
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  2. 07-27-2019 #2
    123pugsy
    123pugsy is offline
    Tuner
    Join Date
    Jun 2011
    Location
    MARKHAM,ON
    Posts
    77
    I guess I'll have to answer my own question/issue.
    I found a thread from a couple years back about the same thing.

    https://forum.hptuners.com/showthread.php?64921-Scanner-TCC-MODE-and-TCC-APPLIED-clarification

    TCC Applied must actually mean nothing or that the system is ready.

    Log attached with more channels open showing TC off, apply en, or locked.
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  3. 05-22-2022 #3
    BBCCARGUY
    BBCCARGUY is offline
    Tuner in Training
    Join Date
    Mar 2015
    Location
    Ia
    Posts
    13
    I see this is dated a couple years ago but I noticed that my 4l65e is saying that the Tcc is applied at 8 mph at 1400 rpm in first gear and stays locked all the way through all gear changes up and down until I get down to 6 mph then it shuts off. Regardless of the settings and even if I push the brakes as well as shift manually nothing seems to make a difference. Has anyone else had this issue?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »