Results 1 to 2 of 2

Thread: Gen5 Lt1 swap no throttle

  1. #1
    Tuner
    Join Date
    Feb 2007
    Location
    SC
    Posts
    61

    Gen5 Lt1 swap no throttle

    I am using a stock 2016 lt1 with an 8l90e trans (t87). All the operating systems are from the donor vehicle. The problem I am having is when the Accelerator pedal is depressed the scanner reads 99% at wot but the throttle only opens to around 25%. Tried moving all of the torque limiters up with no improvements. There are no reduced engine power, app, or tp codes being set. Any suggestions would be appreciated.

    update: Went and drove truck, after 3 mph the throttle responds and is normal until vehicle is stopped again. Seems to be a brake torque issue but all is removed.

    1984 silverado lt1 throttle.hpl
    Attached Files Attached Files
    Last edited by owens1; 05-24-2022 at 11:52 AM.

  2. #2
    Advanced Tuner dhoagland's Avatar
    Join Date
    Jun 2015
    Location
    Aubrey TX
    Posts
    890
    You posted your tune, that is good...

    Post a log of this happening and you will get more responses here
    2011 Camaro 2SS Convertible L99 Bone Stock for now
    2003 Dodge 2500 5.9 Cummins QC 4x4. Airaid, 2nd Gen Intake, Grid Heater Delete, D-Tech 62/65/12, Magnaflow. Bully Dog: Propane Injection, Triple Dog W/Outlook Crazy Larry. Edge EZ, BD Flow-Max, 48RE: Sonnax Sure Cure/Transgo combination, Derale turbulator, billet input, Triple Disc, Super servo, 4 ring Accumulator. :beer