Hey everyone thanks for the add. Old guy here trying to figure out new stuff. I built a 198 Dodge 2dr sedan and drove it for a year with a 440/727, then decided to step into the 21st century and swaped in a 2005 5.7 GEN III hemi from a Chrysler 300. I live in the middle of nowhere in SW Saskatchewan and had to send my computer to another province to get it unlocked and reprogrammed. Since then with issues a plenty I purchased HP tuners and have been slowly diving in. I don't plan on ever being a tuner but would like to be able to turn functions on and off and unlock the pcms. I made a couple changes to P/N rpm and starter relay enable/disable and went to do a write and got this error each time. "controller init: not ready" and the write failed. I have no Idea what I'm doing wrong, any help would be appreciated.