Best tuner for the C7 Z06 A8 that is willing to help?

[02402ramair]

Who is the best tuner on the C7 Z06 A8 willing to help a fellow tuner? I don't mind paying for some advise, tips, tricks or whatever. My car is running good but has some issues that need to be fine tuned.

Hesitation or delay from the time you go 100% pedal to the throttle body starting to open causing a bad reaction time. I don't get 100% throttle till 5mph. Controlling the lockup is also an issue. The car runs great other than that. All the torque tables dialed in on the dyno using torque numbers. Tuned speed density with trims and w/b. Tuned MAF with trims and w/b. Car starts great, idles great, drives great, shifts great. Very happy with the car just need to work on the issues I listed.

I see post after post saying its all in the torque tables but never a fix posted. I have asked for help from tuners that have this figured out and two from here and they will not help. This is top secret stuff.

Please don't ask me to post tune and logs. This is top secret stuff.
I will E mail it if someone is willing to help

C7 Z06 A8
1000rw plus
MS109 and triple meth
Maggie 2650
Heads and cam
low side
all supporting mods

Thanks for any help

[TriPinTaZ]

This is why you aren't get much help. Any tuners that know what they are doing need to see logs and files. Even if you pay them, they need to see the files.

As general advice, you have a torque limiter table not addressed possibly, or your Virtual Torque model needs some work in the problem areas or both. Not the only things but would be the first two the I'd check.

[02402ramair]

This is why you aren't get much help. Any tuners that know what they are doing need to see logs and files. Even if you pay them, they need to see the files.

As general advice, you have a torque limiter table not addressed possibly, or your Virtual Torque model needs some work in the problem areas or both. Not the only things but would be the first two the I'd check.

I have e mailed logs and tune and if you read what I wrote I said I would e mail to who wants to help.

I agree something is limiting it but I have yet to see a log that does not have a delay in it.