Fairly green on these transmissions and don't want to grenade it making mistakes in tuning. My issue is this tranny and LT engine are in a Jeep so am looking at first gear to simply be a move off the line and get to 2nd scenario. Is there a way in HPT to to simply tell the tranny to never be in 1st gear after a certain RPM regardless of thottle position or torque requirements. In 4WD low this issue does not exist. On the street it seems to hang in 1st even with small throttle applications. I am fairly familiar with HPT now (editor and scanner - did my own MAF tune so far) but have not delved into any transmission adjustments based on advice from others who know better.
Thanks for any advice or help in advance.