I have been trying to get this setup to work and I am not sure why it wont fire. Background- I posted a few months back about same situation and I tried a different motor, computer,harness, and injectors in the truck still crank no start. I have a BP harness power 12v key constant even hooked up to battery direct and have two grounds to head , block to frame, head to frame, body to head testing good with meter. I have spark using spark tool and noid shows injectors pulsing with VATS pass on the scanner as well as RPM so crank sensor should be good. I manually pulse injectors(stock, lsa, and currently installed deka 80s and fuel pressure goes down so they operating maybe not as designed but three sets of bad injectors? The engine fires right up on starter fluid. What am I missing? I have spent literally 100s of hours trying to get this to run....Anyone with any suggestions? Thanks!
no start 2.hpl87 c 30 new comp deka 80 2bar step 1.hpt