I wonder why my log shows fixed minus datas for air charge temp, engine oil temp and +138deg C for ambient air ..
I flashed the pcm again with new version of Editor but no change.
I wonder why my log shows fixed minus datas for air charge temp, engine oil temp and +138deg C for ambient air ..
I flashed the pcm again with new version of Editor but no change.
Is there really no one who has seen this wrong datas ???
It doesnt matter what version of scanner, always wrong values on my gpec 2.
I've had a few 2013/14 rams and one 2014 Challenger do the same thing, the 14 ram the temp sensor in the Drivers side mirror had been cut, spliced together , I replaced it, never had the issue again, the 13 ram , replaced the sensor and never had the issue again... the other 13 ram, took 2 new sensors for the issue to go away, the other 14 ram and the Challenger.......Nope didn't matter , 3 sensors later.........Still buggy.
62 Biscayne 425/409 SS/D stock class car 10.60s
66 Dart 426CIG3 8.60@171 2750lbs Naturally asperated
04 Ram All Alum , 468Ci G3 10.50s @4800 lbs Naturally asperated
04 Rumble Bee, built 6.1 ,4000lbs 10.48 @ 129s MPH. Naturally asperated
05 Rumble Stock 5.7, 3.92s TUNE ONLY 13.94@98mph
Reply With Quote