-
Tuner
obs swap with l86 and 8speed trans
dont know if anyone can help me,,, its a 95 c1500, with l86 cam 8speed, stall, im having issues with ecm,tcm not seen brakes applied, installed corvette 3 wire brake switch using pins 68,48,47, also tried a resitor from pin 57 tcc to pin 48,, dont know if i need the body controller for it work,, i havent seen anything on the ecm side or tcm side in hp tuners
-
Tuner
Pin 57 needs 12 bolts applied with brake. If it is still being weird make sure you do this test with engine running. The last fix would be to do a pull down resistor incase the circuit is not pulling down to ground. I love my obs gen v swap!