Dyno 2021 CT4-V CT5-V ABS

[hellbents-10]

Any tricks to stopping the ABS from kicking in and applying brakes?

Did the normal hold TC button down, put in track mode and cruised in 1st gear waiting for ABS lights to light up on the dash. Still holds the brakes when applying throttle.

We pulled the ABS fuse and still no luck.

We have a 424 with the linx system so the front and rears are always rolling the same speed too.

[04silverado6.0]

Have you tried to unplug the actual abs module? I apologize, im not familiar with these cars at all. Id guess it would trigger a limp mode?