Results 1 to 3 of 3

Thread: Swirl Control valve Position

  1. 07-25-2022 #1
    SuperG5
    SuperG5 is offline
    Tuner SuperG5's Avatar
    Join Date
    May 2021
    Location
    Mars
    Posts
    50

    Arrow Swirl Control valve Position

    Does Anyone know if 100% is fully closed or fully open for 2.0 tfsi on med 17.1 . My understanding was that its like throttle position. Looking into these flaps for economy tunes. ty in advance.Screenshot (7).png

    there is also a 2 point table which just boggles my mind . Screenshot (8).png
    Last edited by SuperG5; 07-25-2022 at 01:40 AM.
    Reply With Quote Reply With Quote
  2. 07-26-2022 #2
    LAGP
    LAGP is offline
    Tuner in Training
    Join Date
    Jul 2020
    Posts
    49
    The tumble effect is only used in the low rpm range, 100% should be a closed valve to increase intake air velocity
    Reply With Quote Reply With Quote
  3. 08-25-2022 #3
    wewwolf
    wewwolf is offline
    Potential Tuner
    Join Date
    Aug 2022
    Posts
    3
    Hey have any of you known anyone who has done a manifold flap delete kit on a CPMB flex fuel 2.0TFSI that has the metal intake? I have a 2014 A5 cabriolet and have an APR flap delete kit, but APR says the flap delete kit is for the ea113 engine. My lower plastic intake portion with the flaps and actuator below the metal intake looks the same on ELSAWIN audi electronic service manual.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »