Anyone ever had this code a not had an issue wit the pedal or the throttle body? I have tried new ones of both and still sets that code at about 75-80% throttle. I've checked the wiring and it hasn't been pinched or melted anywhere. ECM issue?
Anyone ever had this code a not had an issue wit the pedal or the throttle body? I have tried new ones of both and still sets that code at about 75-80% throttle. I've checked the wiring and it hasn't been pinched or melted anywhere. ECM issue?
Last edited by Hot Rod Specialties; 07-31-2022 at 10:26 AM.
Is it low on toner? (HP Laserjet P2035)
hahaha sorry fat fingered the code number. 2135
What are you working on?
Are the APP & TB & TAC matched to the original application for the PCM & OS?
Swap vehicle?
Stock harness or modified stock harness or aftermarket harness?
Have you verified the pinouts at all the components at both ends?
Have you verified the wiring/pinout info you're using is correct?
408/ stroked 6.0 stock heads, connect and cruise harness and computer. haven't got into checking pin outs yet. Was just wondering if anyone had seen anything like that. I have extra known good pedal, throttle body, and ecm. same issue. im guessing its got to be a wiring problem.
Can we start with a year, since that's the very first thing I have to enter when looking up service info? And then the make? And platform? Or is it a secret? Proprietary? Can't post the files?
It's a GM connect and cruise kit, I couldn't tell you if the designate them by year. thanks for your help I found the problem.