Results 1 to 9 of 9

Thread: P2135 code

  1. #1
    Tuner in Training
    Join Date
    Nov 2019
    Location
    Idaho
    Posts
    12

    P2135 code

    Anyone ever had this code a not had an issue wit the pedal or the throttle body? I have tried new ones of both and still sets that code at about 75-80% throttle. I've checked the wiring and it hasn't been pinched or melted anywhere. ECM issue?
    Last edited by Hot Rod Specialties; 07-31-2022 at 10:26 AM.

  2. #2
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,451
    Is it low on toner? (HP Laserjet P2035)

  3. #3
    Tuner in Training
    Join Date
    Nov 2019
    Location
    Idaho
    Posts
    12
    hahaha sorry fat fingered the code number. 2135
    Hot Rod Specialties
    HotRodSpecialties.net

    71 Chevy C10 w/408ATK

  4. #4
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,451
    What are you working on?

    Are the APP & TB & TAC matched to the original application for the PCM & OS?

    Swap vehicle?

    Stock harness or modified stock harness or aftermarket harness?

    Have you verified the pinouts at all the components at both ends?

    Have you verified the wiring/pinout info you're using is correct?

  5. #5
    Tuner in Training
    Join Date
    Nov 2019
    Location
    Idaho
    Posts
    12
    Quote Originally Posted by blindsquirrel View Post
    What are you working on?

    Are the APP & TB & TAC matched to the original application for the PCM & OS?

    Swap vehicle?

    Stock harness or modified stock harness or aftermarket harness?

    Have you verified the pinouts at all the components at both ends?

    Have you verified the wiring/pinout info you're using is correct?
    408/ stroked 6.0 stock heads, connect and cruise harness and computer. haven't got into checking pin outs yet. Was just wondering if anyone had seen anything like that. I have extra known good pedal, throttle body, and ecm. same issue. im guessing its got to be a wiring problem.
    Hot Rod Specialties
    HotRodSpecialties.net

    71 Chevy C10 w/408ATK

  6. #6
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,451
    Can we start with a year, since that's the very first thing I have to enter when looking up service info? And then the make? And platform? Or is it a secret? Proprietary? Can't post the files?

  7. #7
    Tuner in Training
    Join Date
    Nov 2019
    Location
    Idaho
    Posts
    12
    It's a GM connect and cruise kit, I couldn't tell you if the designate them by year. thanks for your help I found the problem.
    Hot Rod Specialties
    HotRodSpecialties.net

    71 Chevy C10 w/408ATK

  8. #8
    Senior Tuner
    Join Date
    Nov 2017
    Posts
    1,408
    Quote Originally Posted by Hot Rod Specialties View Post
    It's a GM connect and cruise kit, I couldn't tell you if the designate them by year. thanks for your help I found the problem.
    And no feedback on what the problem was?

  9. #9
    Tuner in Training
    Join Date
    Nov 2019
    Location
    Idaho
    Posts
    12
    Quote Originally Posted by gtstorey View Post
    And no feedback on what the problem was?
    Sorry, I had a power issue to the trans computer. I never though it would've caused it.
    Hot Rod Specialties
    HotRodSpecialties.net

    71 Chevy C10 w/408ATK