Results 1 to 6 of 6

Thread: Dtcs after tune

  1. #1
    Tuner in Training
    Join Date
    Aug 2022
    Posts
    16

    Dtcs after tune

    So I had my car tuned recently. Now I'm getting code after code. I'm getting p1400 for unauthorized software. Does that cause a cel? Now I'm getting u1134 and u1140 for the exhaust valves. Do they cause a light? I'm also getting p0125, p0430, p0219a. I think these last 3 are related. Any ideas? If I clear codes and start the car and drive for any amount of time the light stays off, but soon add I shut it off and restart it comes on immediately every time.
    Last edited by Stultzd; 08-11-2022 at 06:11 AM.

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    the 1400 is due to software change/unlock i assume newer model 2015+ ecu

    125 if you changed your thermo will cause it
    430 catless
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  3. #3
    Advanced Tuner N2speed's Avatar
    Join Date
    Mar 2021
    Location
    Pompano Beach FL
    Posts
    261
    P1400 Does not cause a CEL the other codes will


    www.n2speed.com
    http://www.amp4x4.com
    [email protected]

    Dodge And GM Tuning Suppport
    Diablosport CMR | HP Tuners

  4. #4
    P1400 can be turned off

  5. #5
    Potential Tuner Blk-D3-Hemi's Avatar
    Join Date
    May 2022
    Posts
    8
    Would you like to elaborate on the P1400 being able to be turned off. I've been told this is not possible.
    '22 Durango Blackout R/T+

  6. #6
    Advanced Tuner
    Join Date
    Jan 2022
    Posts
    903