Hi all
Did an NV3500 swap on my 96 Ram. Having trouble getting rid of code P0743 even though all P07XX codes are disabled. Any ideas why this code won't go away? Light stays off but code stores in memory.
Hi all
Did an NV3500 swap on my 96 Ram. Having trouble getting rid of code P0743 even though all P07XX codes are disabled. Any ideas why this code won't go away? Light stays off but code stores in memory.
ether private message or post your tune file and i will take a look at it and see if we can convert it over to a manual file if not you will have to swap to a manual trans computer and just copy and paste all your changes over to the new pcm.
01 dodge dakota 5.9 swapped nv3500, ported stock heads, m1 intake, 220 220 custom grind comp cams, 10.3:1 compression tuned by me with hp tuners.
15 jeep jk 3.6 lifted on 33s 87 octane custom tune by me with hp tuners
04 dodge dakota 4.7 air ram heads, 08 cams, 08 intake manifold, 10.5:1 compression, 341whp custom tuned by me with hp tuners.
What was the resolution to this? I'm in the same boat with my 98 dakota.Originally Posted by [email protected]
Ram 5.9 Manual Stock DTC MONITOR DEL.hpt
Here's my current tune. Haven't bothered with it much since I don't have to pass emissions, but it would be nice to get the code to go away.
thats the same with my truck you can disable to light from coming on with the code but i havent found a way to disable the code from setting when scanning im still fighting to find my evap leak and do a vin write to the abs modual due to vin mismatch from having a different pcm in my 01 dakota then i will work more on finding a solution.
01 dodge dakota 5.9 swapped nv3500, ported stock heads, m1 intake, 220 220 custom grind comp cams, 10.3:1 compression tuned by me with hp tuners.
15 jeep jk 3.6 lifted on 33s 87 octane custom tune by me with hp tuners
04 dodge dakota 4.7 air ram heads, 08 cams, 08 intake manifold, 10.5:1 compression, 341whp custom tuned by me with hp tuners.