WOT Entry Max Airflow?

[Fox95]

WOT Entry Max Airflow


under> Engine>airflow>dynamic airflow

this parameter is disabled.... Why?

this is on a 2004 tahoe. I would think that this should be enabled, correct?

also is there any benefit to lowering the <High RPM disable> rpm value? it's set at 4000....

I think this was disabled by someone else before I got into this vehicle, I have been pouring over every parameter in it for 2 weeks removing KR. and smoothing things and everything else..... I have enough data logs to fill a hard drive.

thanks.

Oh yeah I know this is LS1 area, but it seems to get a lot of traffic and I put it here so someone in the know might see it.

[EC_Tune]

It's disabled on virtually all the LSx motors.

Here's the def from the help file:
WOT Entry Max Airflow: If yes then set predicted airmass to ideal (maximum) cylinder airmass when entering WOT (Zone #1).

[chino]

this might be a long shot for a answer but here's a try. So should it be disable or should it be enable. And why is it for thanks in advance