Results 1 to 5 of 5

Thread: 6r80 TCC ford ranger 3.2 sid 208

  1. 08-29-2023 #1
    Caliael
    Caliael is offline
    Tuner in Training
    Join Date
    Sep 2019
    Posts
    11

    6r80 TCC lockup ford ranger 3.2

    Hello, I want to lock my tcc faster from 1st to 2nd and 3rd gear. On the TCC base map there is slip unlock and lock values for evey gear. How i make it lockup faster on the tcc base map? I increased lockup rate and lock after shift without sucess.
    Thanks.
    Last edited by Caliael; 08-31-2023 at 02:30 PM.
    Reply With Quote Reply With Quote
  2. 08-31-2023 #2
    Caliael
    Caliael is offline
    Tuner in Training
    Join Date
    Sep 2019
    Posts
    11
    Hello?
    Reply With Quote Reply With Quote
  3. 09-01-2023 #3
    projectlnf
    projectlnf is offline
    Advanced Tuner projectlnf's Avatar
    Join Date
    Jun 2012
    Location
    warrenton va
    Posts
    470
    When you mean lock faster do you mean the actual locking of the torque converter or do you mean lock it sooner in the RPM?s
    Reply With Quote Reply With Quote
  4. 09-01-2023 #4
    Caliael
    Caliael is offline
    Tuner in Training
    Join Date
    Sep 2019
    Posts
    11
    To lock it sooner on RPM, i reduced desired slip. Increased lockup rate. Reduced tcc apply delay. Not sure on the TCC base map if I should reduce or increase slip and lock numbers.
    Reply With Quote Reply With Quote
  5. 09-02-2023 #5
    projectlnf
    projectlnf is offline
    Advanced Tuner projectlnf's Avatar
    Join Date
    Jun 2012
    Location
    warrenton va
    Posts
    470
    Post your file so I can take a look at it or PM it to me if you want. Either way is fine with me
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »