Is Pro Feature Set needed to interface with Ballenger AFR500CAN on MVPI2+

[jbeez]

As the topic asks, is pro feature set needed? Also would I need the prolink dongle?

Thanks,

[Bill@HPTuners]

Yes, pro feature set and pro link cable are necessary to add an analog input or can input.

[morganf]

As the topic asks, is pro feature set needed? Also would I need the prolink dongle?

Thanks,

No, because the AFR500CAN uses the vehicles OBD2 CANbus(with OBD2 pass-though plug) it does not require the addition analog input or CANbus of Pro feature set.
Source: The designer/programmer of the AFR500CAN

[Bill@HPTuners]

No, because the AFR500CAN uses the vehicles OBD2 CANbus(with OBD2 pass-though plug) it does not require the addition analog input or CANbus of Pro feature set.
Source: The designer/programmer of the AFR500CAN

Ahh thanks for clearing that up, I've only personally used widebands with analog inputs and my mustang which has factory integrated widebands.