Results 1 to 14 of 14

Thread: VCM Suite v5.0 Now Available!

  1. #1
    HPT Employee Darek@HPTuners's Avatar
    Join Date
    May 2018
    Location
    Chicago, IL
    Posts
    125

    VCM Suite v5.0 Now Available!



    VCM Suite v5.0 Now Available

    HP Tuners presents VCM Suite v5.0 which is now available for download via our website here.
    Our latest update of VCM Suite includes newly supported vehicles (internet connection required),
    updated definition support with more parameters available, additional controller functions and a
    wider range of scanning abilities and functionality.

    We continue to work on expanding our support across all of the platforms that we offer, and try
    to add as many different models as we can. It is also important to keep in mind that some of
    the new support that we offer does require an internet connections when writing to the vehicle.
    For more information, and to view the latest supported vehicles list, click here.

    Please note, VCM Suite 5.0 is fully compatible with all generations of MPVI devices,
    however some vehicle may only be supported on the newer interface.

    Thank you from the entire HP Tuners Team for all your ongoing support, and please ensure you
    follow us on our social media channels for all the latest updates!

    Facebook - Instagram



    VCM Suite v5.0 Updates


    General
    • Advanced Parameters Training is released. Some advanced parameters will be locked until
      you complete the training. Once you complete the course, enter the code into the software
      under HELP > Parameter Access and the parameters will be unlocked.

    • Multi-language support is here. VCM Scanner and VCM Editor now support multiple languages
      (toolbars and menus). Our team is continuing to add more languages and expand translations
      within the software, so stay tuned.

    • Markers are back! While scanning, you can place a marker in the log by pressing the M key.
      During playback, the marker will be displayed in the timeline.

    • Drive Cycle displays are added. This is extremely handy if you're emissions testing.

    • Improved Vehicle Profile Editor. This allows users to open/save vehicle profiles for easy
      sharing as well as import them from a log file.

    • Improved histograms. A new type of graph is available in the Graph panel.


    Vehicle Support

    Audi

    • 2007-2018 Audi TT 2.0 TFSI
    • 2007-2020 Audi TTS 2.0 TFSI


    FCA/Stellantis
    • Cummins CM2450 and CM2350 - Switch on the Fly



    For the full VCM Editor Change Log, please see the following link:
    http://www.hptuners.com/help/VCM-Edi.../changelog.htm

    For the full VCM Scanner Change Log, please see the following link:
    https://www.hptuners.com/help/VCM-Sc...changelog.html

    For more information, and to view the latest supported vehicles list, click here.


  2. #2
    The download link is still version 4.12/4.13.

  3. #3
    Yup

  4. #4
    Tuner
    Join Date
    Sep 2015
    Posts
    53
    yup, the download is an older version..

  5. #5
    It's up now.

    Still no EXHAUST tab for Gen Vs?

  6. #6
    Tuner
    Join Date
    Apr 2009
    Location
    West Plains, Missouri, USA
    Posts
    55
    Will there be a firmware update that will prevent MPVI2 use with older 4.12.4?

  7. #7
    Potential Tuner
    Join Date
    Aug 2021
    Posts
    1
    What are the locked(before trainnig) advanced parameters?

  8. #8
    Potential Tuner
    Join Date
    Feb 2022
    Posts
    5
    Has anyone used their MPVI2+ with version 5 and then checked to see if their MPVI2+ still works with version 4?

  9. #9
    Advanced Tuner
    Join Date
    May 2014
    Location
    USA
    Posts
    444
    Quote Originally Posted by dimitritic View Post
    What are the locked(before trainnig) advanced parameters?
    I just quickly looked at a few files. O2 sensor related codes/tables and a few other emissions related things. Strangely the catalyst codes weren't blocked out.

    After the training unlock, pretty much everything was open again. On the few files I looked at, a few Evap related codes were still not able to be modified.

    I didn't resync or anything, but no forced firmware update on my MPVI2

  10. #10
    Tuner in Training
    Join Date
    Mar 2020
    Posts
    10
    After completing the training I still cant adj virtual torque on my e38 ecu. Do I need to contact support?

  11. #11
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Quote Originally Posted by Jmike575 View Post
    After completing the training I still cant adj virtual torque on my e38 ecu. Do I need to contact support?
    Install newest beta which fixes the virtual tq calc bug.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  12. #12
    Tuner in Training
    Join Date
    Mar 2020
    Posts
    10
    Ill try that. Thank you.

  13. #13
    Advanced Tuner
    Join Date
    Mar 2020
    Posts
    380
    radz28, the exhaust valve stuff (I'm assuming that's what you're looking for) is in the CCM on Gen V stuff. You have to read the CCM and it's 1 extra credit I believe to license it. This is the process on a 2020 Camaro at least...

  14. #14
    Tuner in Training
    Join Date
    Mar 2021
    Posts
    13
    Any chance a more comprehensive change log is possible? I received an update that new parameters were released in the Beta (VW MQB 2.0T) and am curious if any of the new params are related to an issue I've been chasing. Would be nice to at least know what is new.

    Thanks!