Upgrade to MPVI Pro ?

[NVE THIS]

I have an old serial interface from when I ordered HPTuners a while back. I am considering upgrading to the Enhanced IO MVPI Pro so I can do things like add a wideband O2. I currently have a cam'd LS1 and N20. Would I be able to do things like adjust air/fuel with HP Tuners like I would with a MAFT? If so I am not going to waste money on the MAFT, but if I think simply, the MAFT interupts the signal and I would essentialy be able to do the same with HPTuners and not need the "tirkc box". Any help would be appreciated. Thanks.

-Bryan
2001 Trans AM WS6

[Bill@HPTuners]

Would I be able to do things like adjust air/fuel with HP Tuners like I would with a MAFT?

you've always been able to adjust fueling via hundreds of fueling tables

[NVE THIS]

you've always been able to adjust fueling via hundreds of fueling tables

I knew it was a dumb question but I just wanted to make sure. I have a LOT to learn still about this thing I'm not wasting my $$ on a MAFT but will upgrade to get the ability to add the Wideband O2 for the cam and N20. Thanks for the reply.

-Bryan

[Bill@HPTuners]

but will upgrade to get the ability to add the Wideband O2

sounds good