SIMOS 18.1 Tuning any tipps?

[AlexRodi]

Hey,
i put on a 1.8t a IS38 and trying to get some power but i feel like i don't get any power change or boost change.
Thanks so much for the Help

Matthew Wagon Stage 3 base3.hpt4th log.hpl

[outlaw_50]

You need to increase the commanded boost

[AlexRodi]

You need to increase the commanded boost

Do you mean the Max PR? i did increase that but seem not to change a lot.

Thanks For the response

[AlexRodi]

i forgot here is the Base file and current file together

[smelly240]

you need to learn the ecu before trying to tune these..

you didnt raise max intake air, you did nothing to TTA/ATT tables, aircharge to tq is not good.

max PR is pretty low.... put it at least 3.5-4

you will also need to adjust cam angles to get top end out of it.

[GCtech]

Turbo Upgrades on these ecus require extensive Turbo Model work for correct functionality, there a few documents you can read on how raising boost, remember is a complex torque model system yet very simple if proper data is applied, I attached a simple document you can read and will guide you thru the process of increasing torque and a few limiters you need to address, NOTE: You can get away if you have access to the is38 turbo flow model it would make life easier , pm me and I can send you the data if you don't have a Golf R ecu read

cheers

[AlexRodi]

you need to learn the ecu before trying to tune these..

you didnt raise max intake air, you did nothing to TTA/ATT tables, aircharge to tq is not good.

max PR is pretty low.... put it at least 3.5-4

you will also need to adjust cam angles to get top end out of it.

Thanks so much for the Input i will research more, i try to learn and tune, i will look at the cam angles do you have any suggestion on that?
Thanks again

[AlexRodi]

Turbo Upgrades on these ecus require extensive Turbo Model work for correct functionality, there a few documents you can read on how raising boost, remember is a complex torque model system yet very simple if proper data is applied, I attached a simple document you can read and will guide you thru the process of increasing torque and a few limiters you need to address, NOTE: You can get away if you have access to the is38 turbo flow model it would make life easier , pm me and I can send you the data if you don't have a Golf R ecu read

cheers

Thanks so much i start reading