OK, need a little assistance. New Gen V 5.3, manual, LT5 cam, LT1 intake in a 240z - etc. I have turned off MAF and 02's to adjust the MAF. However when i fire up and check I get an average of ~ -20 (some higher / some lower) in the EQ err. When I change the MAF table, it looks like it stays the same (average about -20).
I have checked all my graphs, sensors etc, however I am in a spiral and not sure WTH I am doing incorrectly. If someone could take a second, look at my tune, and my logs - and point me in a direction. Any help would be appreciated