Gen 4 BTR Stage 4 Cam with boost.

[mlgprodriver]

Well guys, I purchased the MPVI3.

I have a 2010 Chevy Camaro 2SS

It is a 6 Speed manual. With a BTR Stage 4 Cam Shaft, and now it has an AGP Twin turbo kit on it.

I am looking to start working on the tune file.

I have watch tons, and tons of videos, read many forum post, and I have read many many articles.

I am going to start working on the Maf tuning tomorrow, since its the easiest.

My question is, where should I begin in the timing tables? The car was tuned with the BTR Stage 4 Cam NA. So now I want to know where should I generally shoot to be at in the Spark?

Thanks so much, and yes! I am a noob.

[5FDP]

Probably will want to aim for mid teens, like 14-15 degrees of timing when it starts to get into boost. Keeping it low is safer while fueling is figured out.

I assume you have the proper sized injectors with data along with a 2 or 3 bar MAP sensor too.