Logging/tuning issues JTEC+

[joefus25]

I am not sure if I have done something wrong or my PCM is not fully supported but I have a few questions:
1) I am unable to read DTCs in the scanner, but they will clear... Has anyone seen this before?
2) When I try to chart some channels on the histogram, they are not available in the list, even if I have them in the channel list and they have logged information.
3) It seems that I am missing some useful channels to even log...

Even as far as tuning this file, it seems like I am also unable to modify certain things:

I can not seem to find a way to rescale any tables?

I have tried the latest beta as well as 5.0.4

56040145AG PCM
99 Dakota, 410 stroker, auto
shot1.jpg
shot2.jpg

[joefus25]

Anyways, seems that hpt can not read DTCs or log PIDs on this ECU. Is there anything I can do to get some of these things added to the next beta or something? I am having a hard time tuning this as I have to switch back and forth between SCT, HPT and my Snap-on scanner to read everything.

Note: I am dumb and figured out how to rescale tables.

[jbliss15]

Anyways, seems that hpt can not read DTCs or log PIDs on this ECU. Is there anything I can do to get some of these things added to the next beta or something? I am having a hard time tuning this as I have to switch back and forth between SCT, HPT and my Snap-on scanner to read everything.

Note: I am dumb and figured out how to rescale tables.

to date, there doesnt seem to be any change to this.

i can't do anything that you mentioned using HPT with jtec+

can't even change the speedo calibration

did you ever find out anything new about this?