Results 1 to 5 of 5

Thread: Remote tune ecm

  1. #1
    Tuner in Training
    Join Date
    Apr 2023
    Posts
    10

    Remote tune ecm

    Im looking for someone to either help me or point me in the right direction with tunning my truck. Its a 2006 silverado with a 4.8, BTR NSR cam i swapped in because the factory one got lobes worn off from lifter failure, headers with no cats, and a tbss intake and p59 ecm. The truck was "tuned" previous to everything i did and it ran like crap. any help is welcome. i dont have a wideband installed yet either, which im not worried about wot tunning at the moment since its a daily driver. This is the tune i have so far
    Attached Files Attached Files

  2. #2
    Advanced Tuner
    Join Date
    Mar 2009
    Location
    Andover, MN
    Posts
    446
    You would have a lot better results in Gen 3 forum being it is a gen 3.

  3. #3
    Tuner in Training
    Join Date
    Apr 2023
    Posts
    10
    I just noticed i was looking in the wrong part of the forum, it makes a little more sense now lol. much appreciated

  4. #4
    Senior Tuner
    Join Date
    Nov 2006
    Posts
    2,742
    We do remote tuning if you need

    www.pcmofnc.com
    Tuner at PCMofnc.com
    Email tuning!!!, Mail order, Dyno tuning, Performance Parts, Electric Fan Kits, 4l80e swap harnesses, 6l80 -> 4l80e conversion harnesses, Installs

  5. #5
    Senior Tuner
    Join Date
    Mar 2022
    Location
    Indiana
    Posts
    2,938
    Alvin does top notch work.