So my issue is anytime I'm at the track and i try to run more than 18# of boost the motor shuts off!!!
Is there something in the software that would cause this? My OS is 3bar SD. unfortunately when i drive on the street i never get to 18# due to lack of traction.
After the motor shuts off I can restart with no issues. It has been doing this since I switched to SD 2 years ago, so that is what makes me think its in the tune. And the amount of time it has been I have gone through anything that could be mechanical or electrical ie wiring. also When I am out in Mexico doing some roll racing I can get it over 18# and as high as 31# but I am only running 3rd gear doing that.
Bellow is my tune and last log that the motor shut off. the area of the shut down on the log starts at 1:07 on the time stamp and goes to 1:22
if any other info is needed please ask.
0411 ecm
running a 6.0 w/forged rods and pistons on E85
I am running E85 but still using pump afr wide band
4L80e trans