Originally Posted by
blindsquirrel
I didn't see anything I'd call an oscillation in that log, nothing that didn't correspond to throttle movement, at least not in what I think was the WOT section you mentioned. There will be some 'noise' in sensor readings sometimes, like bouncing between one min increment and the next.
You can trim down logs. Log File > Export Log File, then select format: .hpl and range: Visible Range (use the zoom function to set what's shown and what's not)
You can also go drive around and then tap the spacebar to stop, then tap again to restart, do your WOT thing where you think it acts weird, then tap spacebar again to stop. You end up with a separate small file that only shows the relevant part.