I am not going to mention the name of the shop but they have been around a long time! The car is a 2016 Z06 mostly built by me with their recommendations.
Magnuson TSV2650
Stage 3 Cam kit - Recommended by the shop for this blower (233/247 632 635 116 LSA )
15% OD Pulley
Cordes intake
Methanol
E85 30%
1 7/8" headers (only ones available during covid)
Throttle Body
LS Fuel Pump
The first 2 tunes the car will not launch, it use to just fall on its face, hiccup and then start going. So now they have just increased the idle rpm's to 950 and tell me that I hold it about1200 rpms to launch the car. The car shift at certain gears we it want to. Well it doesn't bog down but the 60' is terrible!
Best 60' is a low 1.8, best ET 10.2 not shifting correctly. I have had the car there 3 times for the tune. Now they are telling me that the cam (they recommended/their specs) is not going to work with this blower! Weird thing is the owner told me they build these 2650's all the time and the tuners tells me its the first one he has done after he as attempted to tune it!
Its been dropped off 3 times and he has sent me several tunes by email. Also after he tuned it this last time I had too purchase more credits, confused on that as well?
Any help would be appreciated, Thanks Gary.