Results 1 to 2 of 2

Thread: Help with filter when car is in decel

  1. #1
    Tuner
    Join Date
    Aug 2016
    Location
    SE WI
    Posts
    87

    Help with filter when car is in decel

    Working on trying to tweak MAF in OL. In decel, graph shows +100. All I want to see is steady state data or and/or +TP.

    Appreciate any help...

  2. #2
    Senior Tuner
    Join Date
    Nov 2017
    Posts
    1,411
    I usually filter out for accelerator pedal <1.00% and then log again running idle areas only to tune that.

    All of this will likely vary what you are tuning on exactly how to set it up, so you might want to ask in the particular vehicle section you are tuning.