I install 3.5" MAF Housing and i tuned the car at idle and part throttle , I got better throttle respond and it working with no issue
But it does not change anything at wot?
the only change i can see that i got lower MAF frequency at wot, and this is normal because of the intake size.
Wideband reading the same as target Lambda.
and It suppose to read more air at wot so i can add more fuel to get the benefit from installing Bigger intake size.
What i realize is the MAF does not control the wot. even after lowering dynamic high RPM 150 to get full control from MAF table.
inlet 3.5" ( Maf housing only ) after that connected to 3" intake.
E39A ECU , ATS 2.5
What would be the issue?
Thank you in advance.