This thing is already kicking my butt with a few things! Never tuned a flex fuel/DOD computer before and I think that's where my problems are. Starts and idles cold pretty well, the traction control light and stabilitrac light come on?? Then gets up to temp and there is 35 degrees at idle! But still idles until I key off, and then when I try to start it back up it just flares up to about 1400 rpm and then just shuts down. I can kinda keep it running if I give it throttle but it is difficult. Seems like some table is adding a ton of timing somewhere, but I have tried zero'ing out and disabling every table I could find that adds spark, and nothing has worked. Thanks in advance for any direction on any of these issues!
The last log file is actually the first one I took on cold startup, the other ones are just different times I tried to start it and keep it running after disabling different things with no change.
BTW, the cam specs are 230/239 @ .050, 114 LSA. long tube headers, stock intake.
COP CAR 1ST CODES AND TIMING MODS lots of timing tables disabled.hpt
19-06-21 18-28-02.hpl
19-06-21 18-21-56.hpl
19-06-21 18-17-18.hpl
19-06-21 17-37-05.hpl